Contact information
Price list

News and Articles

RagWing Fleet
RW1 Ultra-Piet "Pete"
RW2 Special I
RW4 Midwing Sport
RW5 Heath Replica
RW6 RagWing Parasol
RW7 Duster
RW8 RagWing Pt2S
RW9 Motor Bipe
RW11 Rag-A-Bond
RW16 Aerial
RW19 Stork
RW20 Stork side-by-side
RW22 Tiger Moth
RW26 Special II

How to build a RagWing
Tools required to build a RagWing
Jim Dalens Rib Jig
Kawazaki Engines Info
Nose Bowls
Other plans

Builders Contribution

Links and other inform.



RW26 RagWing Special ll

Both Special I and Special II use Pratt truss construction (no Lattice). No Welding required! Video $20; plans cost $100.  
cutaway drawing RW26 - Overfly (3,81MB) RW26 - Air to air (4,99MB)
Wingspan 18 ft   VNE 135 mph/150 mph
Wingarea 120 sq.ft./125 sq.ft.   Cruise speed 85 mph/110 mph
Length 18 ft   Stall speed 38 mph/45 mph
Height 5.5 ft   Climb rate 800 fpm/1000 fpm
Seats 2   Range  
Empty weight 450 lb/500 lb    Take off run 350 ft/300 ft 
Gross weight 950 lb/1000 lb    Landing roll 450 ft/500 ft
Engine used Rotax 503/912   Service Ceiling 10.500 ft
HP/HP Range 52/52-100      
Fuel Capacity 14 gal.       
Landing Gear tailwheel       
Building materials wood, fabric       
Building time 400 man hours       
Plans cost $100      

© 2006 Ragwing Aircraft Designs